XGS™ Micro Blank Expansion Card
XGS™ Micro Blank Expansion Card
XGS™ Micro Blank Expansion CardXGS™ Micro Blank Expansion Card
XGS™ Micro Blank Expansion CardXGS™ Micro Blank Expansion Card

XGS™ Micro Blank Expansion Card

Manufacturer: Nurve Networks
Product Code: XGS-Micro-BlnkExp-01
Weight:0.50 lb
Reward Points:0
In Stock
18
Price: $14.95
  • 15 contacts per side @ 0.1" (2.54mm) spacing.
  • Small form factor 40x76mm.
  • Material FR4 .062".
  • All contacts thru hole, 0.1" spacing.

Supports entire expansion bus interface, including:

Pin - Signal

1 - RB0
2 - RB1
3 - RB2
4 - RB3
5 - RB4
6 - RB5
7 - RB6
8 - RB7
9 - RC0
10 - RC1
11 - RC2
12 - RC3
13 - RC4
14 - RC5
15 - RC6
16 - RC7
17 - RD0
18 - RD1
19 - RD2
20 - RD3
21 - RD4
22 - RD5
23 - RD6
24 - RD7
25 - RA7
26 - 33VCC
27 - 5VCC
28 - MAIN_OSC_OUT
29 - OSC1_RUN_IN
30 - GND

This blank XGS™ Micro Edition card plugs directly into the XGS's Expansion Interface for simple, straightforward upgrades and modifications. Great for hardware and robotics hobbyists and students aiming to interface the XGS Micro Edition with external devices based on their own designs!

The blank expansion card exposes the entire 30 Pin bus of the Expansion Interface, so you have total control over the signals. The card also, features foot prints for up to (2) 16-pin DIP and (2) 14-pin DIPS simultaneously, or any smaller dip packages such as 8-pin. Additionally, there is a generous number of 3 and 4 common contacts for interconnects and well as a thru hole bus expansion at the contacts for a header if need be.
 

Features:

  • All thru hole footprints.
  • Tined contacts for easy soldering.
  • Solder mask on both sides with fully labeled interface signals.
  • Surface mount 0805 footprints for power decoupling capacitors.

Please login or register to leave a review.