34 Watt Solar Panel Kit
34 Watt Solar Panel Kit
34 Watt Solar Panel Kit
34 Watt Solar Panel Kit34 Watt Solar Panel Kit
34 Watt Solar Panel Kit34 Watt Solar Panel Kit34 Watt Solar Panel Kit

34 Watt Solar Panel Kit

Manufacturer: Parallax
Product Code: SOLAR-34W-kit_33000
Weight:3.00 lb
Reward Points:0
Out Of Stock
Price: $139.99

34 Watt Solar Panel Kit.34 Watt Solar Panel Kit - Content.34 Watt Solar Panel Kit - assembled.

Parallax’s 34 Watt Solar Panel Kit is a do-it-yourself system that can produce up to a maximum of 34 watts of clean green electrical energy.

This is not another solar demonstration toy! It is a true “kit”—you assemble it from a pile of raw parts—and when you’re done, you will have a solar panel that produces a substantial amount of electrical power. In fact, the energy produced per square foot is comparable to many commercially available solar panels. And, when you permanently seal the panel, it can withstand the outside elements as well.

The demonstration videos (located in the Video Gallery tab above) show you how to properly handle and solder the delicate cells and their wiring interconnections.

Key Features:

  • Array of 12 commercial-grade 125 mm (~5"), 2.85 watt, 18.5% efficiency monocrystalline solar cells.
  • UV stabilized polycarbonate base and cover panels provide outdoor durability and high light transmission properties without the fragility of glass or brittleness of acrylic.
  • Custom-milled base panel with a protective recess for each cell simplifies assembly.
  • Daisy-chain multiple units together for higher voltage/current/power output.

Application Ideas:

  • Portable power for camping, remote monitoring, and control systems.
  • Fixed power station for off-grid energy production.
  • Mobile robotics and solar charging stations.


  • Maximum Power output: 6 VDC @ 5.7 amps (approx. 34 watts max.).
  • Dimensions: 23.8 x 15.8 x .375 in (60.45 x 40.12 x 0.95 cm) assembled.

Kit Contents:

  • 14 - pack of solar cells (two extra!).
  • Polycarbonate base and cover panels.
  • Flux pen.
  • Cell tabbing wire.
  • Adhesive backed flat copper bus-bar wire.
  • Polycarbonate cement.
  • Disposable gloves.
  • 2 - plywood "Cell Workbenches".

Replacement Cells:

  • Single Cell Replacement.
  • 6-Pack Cell Replacements.
  • 13-Pack Cell Replacements.


  • Soldering required. (See the product document below for the full list of additional tools you will need.) Budget about 8 to 12 hours to complete the assembly process for your first panel. Once you have mastered the technique, your next panel will go much faster.
  • See the product documentation below for the list of additional tools needed and the complete step-by-step assembly process.


Please login or register to leave a review.